Model Number: CLG4215 Brand Name: ORIEMAC Key Specifications/Special Features: 215HP mini grader CLG4215 small motor grader for sale Engine　DCEC 6CTAA8.3-C215 Rated Power (kW) 160(215)@2200 Blade Width mm(inches） 3960(156) Maximum Speed km/h (mph) 40.3 (25) Draw Bar Pull （kN) 86 Operating Weight kg(Lb) 16500(36376) ENGINE Tier 　 II Make 　 Dongfeng Cummins Gross Power kW(Hp)@rpm 160(215)@2200 Net Power kW(Hp)@rpm 144(195)@2200 Peak Torque 　 908N.m/1500rpm Torque Rise % 　 31% Number of Cylinders 　 6 Aspiration 　 turbo air-to-air aftercooled TRANSMISSION Transmission Type 　 power shift Transmission Configuration 　 6f/3r Torque Converter 　 three-member single turbine Maximum Travel Speed, fwd （km/h） 42 (25.8) Maximum Travel Speed, rev （km/h） 25.6 (15.9) Number of Speeds, fwd 　 6 Number of Speeds, rev 　 3 AXLES Front Axle Make 　 LiuGong Weld axle Rear Axle Make 　 Meritor Differential Type 　 No-spin limited slip standard Final Drive Type 　 chain drive Axle Oscillation 　 ±15° Front Axle Type 　 all welded steel frame Front Axle, Wheel Lean Angle 　 ±17° STEERING Steering Configuration 　 load sensor steering gear Steering Relief Pressure （Mpa） 17 Minimum Turning Radius (inches） 8000(315) Steering Angle 　 ±45° Frame Articulation Angle 　 ±20° BRAKES Service Brake Type 　 (Dry)shoe Service Brake Location 　 rear axle only Service Brake Actuation 　 hydraumatic TIRES Tire Size 　 17.5-25 PR12/L3 HYDRAULIC SYSTEM Main Pump Type 　 gear Main Relief Pressure （Mpa） 18 Pilot Pump Flow L(Gal)/min 126(33) WORKING CAPACITIES Maximum Draw Pull （kN) 90 Cutting Pressure kg(Lb) 8100(17857) TANDEM DRIVE PERFORMANCE Height mm(inches） 600(24) Width mm(inches） 210(8) Thickness, inner wall / outer wall mm(inches) 20/20(0.8/(0.8) Center Distance mm(inches) 1538(61) Oscillating Angle 　 ±15° MOLDBOARD PERFORMANCE Bank Cut Angle 　 40~70 Moldboard Lift Above Ground mm(inches） 405(16) Moldboard Side Shift, right / left mm(inches） 725/675(29/27) Maximum Sloping Angle 　 90° Cutting Depth mm(inches） 600(24) Circle Rotation 　 360° Circle Diameter mm(inches） 1455(57) Circle Thickness mm(inches） 140(6) DIMENSIONS Wheelbase mm(inches） 6230(245) Overall Length mm(inches） 8971(353) Overall Height with Cab 　 3438(135) Overall Width mm(inches） 2600(102) Clearance under Front Axle mm(inches） 645(25) Moldboard Standard Length mm(inches） 4270(168) Moldboard Standard Thickness mm(inches） 19(0.7) Moldboard Standard Height mm(inches） 650(24) OPERATING WEIGHTS Operating Weight kg(Lb) 16500(36376) On Front Wheels kg(Lb) 4700(10362) On Rear Wheels kg(Lb) 11800(26015) SERVICE CAPACITIES Fuel Tank L(Gal) 230(61) Engine Oil L(Gal) 22(6) Cooling System L(Gal) 45(12) Hydraulic Reservoir L(Gal) 186(49) Transmission And Torque Converter L(Gal) 45(12) Tandems, Each L(Gal) 28(7)