Motor Grader, clg4215 Liugong 215HP

Model Number: clg4215 Brand Name: oriemac Key Specifications/Special Features: Liugong 215HP grader with dozer CLG4215Operator comfort and SafetyDustproof, sound reducing, shock absorbing and anti-UV cabinComfortable adjustable suspension seatingAir conditioning optionalFull range of visibility Engine DCE.C 6CTAA8.3-C215 Rated power (kW) 160(215) at 2200 Blade width mm(inches) 3960 (156) Maximum speed km/h (mph) 40.3 (25) Draw bar pull (kN) 86 Operating weight kg(Lb) 16500(36376) Engine Tier II Make Dongfeng Cummins Gross power kW(Hp) at rpm 160(215) at 2200 Net power kW(Hp) at rpm 144(195) at 2200 Peak torque 908N.m/1500rpm Torque rise % 31% Number of cylinders 6 Aspiration turbo air-to-air aftercooled Transmission Transmission type power shift Transmission configuration 6f/3r Torque converter three-member single turbine Maximum travel speed, fwd kph 42 (25.8) Maximum travel speed, rev kph 25.6 (15.9) Number of speeds, fwd 6 Number of speeds, rev 3 Axles Front axle make LiuGong Weld axle Rear axle make Meritor Differential type No-spin limited slip standard Final drive type chain drive Axle oscillation ±15° Front axle type all welded steel frame Front axle, wheel lean angle ±17° Steering Steering configuration load sensor steering gear Steering relief pressure (Mpa) 17 Minimum turning radius (inches) 8000(315) Steering angle ±45° Frame articulation angle ±20° Brakes Service brake type (Dry)shoe Service brake location rear axle only Service brake actuation hydromantic Tires Tire size 17.5-25 PR12/L3 Hydraulic system Main pump type gear Main relief pressure (Mpa) 18 Pilot pump flow L(Gal)/min 126(33) Working capacities Maximum draw pull (kN) 90 Cutting pressure kg(Lb) 8100 (17857) Tandem drive performance Height mm (inches) 600 (24) Width mm (inches) 210 (8) Thickness, inner wall / outer wall mm (inches) 20/20 (0.8/(0.8) Center distance mm (inches) 1538 (61) Oscillating angle ±15° Moldboard performance Bank cut angle 40-70 Moldboard lift above ground mm (inches) 405 (16) Moldboard side shift, right / left mm (inches) 725/675 (29/27) Maximum sloping angle 90° Cutting depth mm (inches) 600 (24) Circle rotation 360° Circle diameter mm (inches) 1455 (57) Circle thickness mm (inches) 140 (6) Dimensions Wheelbase mm (inches) 6230 (245) Overall length mm (inches) 8971 (353) Overall height with cab 3438 (135) Overall width mm (inches) 2600 (102) Clearance under front axle mm (inches) 645 (25) Moldboard standard length mm (inches) 4270 (168) Moldboard standard thickness mm (inches) 19 (0.7) Moldboard standard height mm (inches) 650 (24) Operating weights Operating weight kg (Lb) 16500 (36376) On front wheels kg (Lb) 4700 (10362) On rear wheels kg (Lb) 11800 (26015) Service capacities Fuel tank L (Gal) 230 (61) Engine oil L (Gal) 22 (6) Cooling system L (Gal) 45 (12) Hydraulic reservoir L (Gal) 186 (49) Transmission and torque converter L (Gal) 45 (12) Tandems, each L (Gal) 28 (7)